Woodworking Tips And Tricks To Get You Started On It

Woodworking is something that doesn’t have to be difficult if you know what you’re doing. To learn the basics of woodworking and what you can achieve by learning it, you should read this article. After you do, then you’ll be able to start on your woodworking project and can be sure it’ll turn out just right.

Don’t neglect sanding your wood. Sanding may be tedious, but the quality of your workmanship will suffer if you leave the scrapes and nicks where they are. Not to mention, those scratches and nicks absorb more stain and paint, making them stand out more, and making your work look shoddy.

Organize your shop’s extension cords to keep your shop safe and tidy. You can make your own cord keeper with nothing more than a scrap piece of wood. Simply cut a piece of wood in the shape of an I and wrap each of your extension cords around the wood.

Take the time to plan out your woodworking project step-by-step before you even begin. Doing this will help to ensure that you are going to get the results that you are looking for. If you do not plan ahead it is likely that you will make an error that could ruin the entire project.

When sanding a piece of lumber, beginning with a coarse sandpaper. Remove the excess dust from the lumber. Then, once the largest scratches are removed, sand again with a smoother sandpaper. Follow this sanding with a tack cloth. Continue using smoother sandpaper until the lumber feels smooth when you run your hand across it.

One of the necessary tools for woodworking is the common pencil. Pencils do get lost easily, however. Buy plenty, then store them in an old instant soup container. Fill the container with sawdust and drill holes in the lid. You’ll now have plenty of pencils and the container won’t tip over easily.

Unless you are charging it, never leave your tools plugged in and unattended. You never know who might approach your tool, accidentally setting it off. Not only can this damage the items around it, but the person could be hurt and you could be left liable for the end result.

Check out the selection of videos available on YouTube if you would like to learn more about the hobby of woodworking. There are so many videos available from people of all skill levels that you will never be able to watch them all. You can even search for specific skills that you would like to learn.

Your woodworking shop needs a stair gauge. This is used for laying out stair jacks and can also be used to clamp a carpenter’s square. It can transform your square into a circular saw guide. Using this square will allow you to make cuts that are straight.

You likely already know that you want to have a ruler on hands at all times, but it can be hard to keep it from falling out of your pocket. Get a metal ruler instead, as well as a small telescoping magnet for picking up loose screws. Keep them both in the same exact pocket. The magnet will keep the ruler in your pocket at all times.

You should know how to work with wood while using hand tools as well as power tools. If you are doing one quick action, it may be in your best interest to use a hand tool, but if you are completing a larger task, power tools will save you a lot of time.

You can do a lot of things when you do woodworking. This article should have shown you the ropes in terms of getting into woodworking. Make sure you put what you’ve learned here to good use so that you don’t end up messing up your project and wasting expensive wood.

Back to Top